With the Logster Lite, you can turn your trees and fallen branches into valuable timber in the shape of boards and planks. You can use any chainsaw with a standard guide bar. The bar fits into the bar clamps so no drilling is required. Depth of cut can be set at any depth from 0-12" using the clamps on each side of the frame. There is a chain guard on the end where the bar tip protrudes for safety. This is a simple, well designed, robust device which should give you many years of service.
The mills now come Hot Dip Galvanised which is much more durable than paint. It coats the metal inside and out and will last for many years.
The mills now come Hot Dip Galvanised which is much more durable than paint. It coats the metal inside and out and will last for many years.
We have been developing and testing this design for over a year and it is very easy to cut planks or beams. Just run the sawmill down a ladder or a 6"x2" which has been fixed to the log to get a flat top edge, and then you can start to make your planks and beams.
We would recommend that you hold at the least a basic chainsaw qualification so that you understand the safe use of a chainsaw. It is of course imperative that you use all of the relevant PPE. You are responsible for your own health and safety whilst using this sawmill
The chainsaw in the pictures is for demonstration purposes only and obviously is not included. You will need to drill 2 x 6mm holes to mount the handle in a location of your choice.
We would recommend that you hold at the least a basic chainsaw qualification so that you understand the safe use of a chainsaw. It is of course imperative that you use all of the relevant PPE. You are responsible for your own health and safety whilst using this sawmill
The chainsaw in the pictures is for demonstration purposes only and obviously is not included. You will need to drill 2 x 6mm holes to mount the handle in a location of your choice.
|
TCF Engineering - Designed and built in BritainWe design, test, build and sell simple, tough equipment for Forestry, Tree Surgeons, ARB and smallholder customers. Our products are Made in Britain and we are very proud of this. We make Chainsaw Sawmills, Timber Trailers, Log Arches, Sawhorses, Chainsaw Holders, and much more.
We make a lot of custom made and one off equipment, so if you cant see what you would like, or you want something a little different just drop us an email sales@tcfengineering.co.uk |
|
We are proud to be approved suppliers to the following organisations
|
|
|
|
|
|
|
|
|
© COPYRIGHT 2015. ALL RIGHTS RESERVED.
|
